Hard Truck Tonneaus

Hard Tonneaus are great for keeping your valuables safe in your truck bed. They create almost an armor cover across the top of your truck bed. Hard tonneaus are also a great way to add a few MPGs to your truck- they cut down on drag.

frontier700beachnotch

Dodge Ridged Matching Paint

pl_photos_6_large

Color Matching Black Smooth Lid

Matching Color Lid with Tie Down Anchor Points

BakFlip CS Tonneau Cover With Integrated Rack System

BAKflip Backflip CS Partial Open Racks Installed BAKflip Backflip CS Sliding Racks BAKflip Backflip CS Open Bed Ladder Rack

BakFlip CS Hard Folding Tonneau Cover

The BakFlip CS tonneau cover provides function and resilience in this ladder rack tonneau cover system.  This solid tonneau cover is impact resistant and all season ready.
Technical Specs of BakFlip CS Tonneau Cover:

Panel exterior:
Aluminum
Panel core:
EPS
Panel frames:
HD Aircraft Grade Aluminum
Finish:
Black Powder Coat
Thickness:
5/8 inch
Hinge:
Corrosian Proof EPDM Rubber
Cover Weight rating:
400 LBS. (evenly distributed)
Rack Uprights:
Stainless Steel
Cross Members:
Aluminum
Rack Finish:
Black Powder Coat
Rack Weight Rating:
500 LBS.
Size of box:
68x22x8
Weight of box:
60 LBS
Install tools:
1 x 15mm wrench
Maintenance:
3M Formula 303 UV Protetion
Warranty:
2 years

BAKflip Backflip CS Closed Bed Ladder Rack BAKflip Backflip CS Open Tailgate Rack Storage BAKflip Backflip CS Closed Bed Rack

BakFlip CS Hard Folding Tonneau Cover Features
BAKflip Backflip CS Integrated Rack BAKflip Backflip CS Sliding Rack Rail System BAKflip Backflip CS Sliding Load Locks BAKflip Backflip CS Sliding Tie Downs

Integrated Tonneau and Rack
The BakFlip CS-F1 is the world’s only folding Fiberglass hard truck bed cover with a 500 lb. rack that is integrated into the rail system of the tonneau cover.
Sliding Rack/Rail System
The BakFlip CS-F1 rack uprights easily slide in the tonneau cover rails to allow the rack to be positioned anywhere along the length of the trucks rails.
Sliding Load Locks
The BakFlip CS has load locks that slide in the extruded cross members of the rack. This feature is perfect for gripping anything from ladders and conduit to dry wall or kayaks. These are sold separately in pairs.
Sliding Tie Downs
The BakFlip CS comes equipped with one pair of sliding tie downs. These tie downs easily slide to any position along the length of the truck rails for ultimate cargo control capability. Additional pairs can be purchased separately.

 

Check out the BakFlip CS Tonneau Cover video!

BakFlip F1 Hard Folding Tonneau Cover

BAKflip Backflip F1 Closed Bed BAKflip Backflip F1 Rear Panel Open BAKflip Backflip F1 Half Bed Open

BakFlip Hard Folding Tonneau Cover

Combining impact resistant polymer reinforced fiberglass and the lightweight strength of an aluminum structure underneath The BakFlip F1 is considered flagship model fiberglass tonneau cover in BAK Industries hard cover line-up.  Dependable strength with the ability to take impacts, BakFlip F1 hard folding tonneau is a great year round truck bed cover that looks good and delivers a solid efficiency.

Technical Specs of BakFlip F1 Tonneau Cover:

Panel exterior:
Aluminum underside FRP Fiberglass top
Panel core:
EPS (insulated) 3.5 lb. density
Panel frames:
Aircraft grade aluminum / black powder coat
Finish:
Hair cell texture
Thickness:
1/2 inch (OD)
Hinge:
Flush style corrosion proof EPDM rubber
Weight rating:
500 LBS. – evenly distributed
Size of box:
68x23x8 (inches)
Weight of box:
60 LBS
Install tools:
1 x 15mm wrench
Maintenance:
Wash normally with soap and water / 3M formula 303 UV protection.
Warranty:
3 year – with lifetime warranty on all rubber hinges
Rubber trim
Upgraded scuff protectant
Handles
Upgraded injection molded
Additional upgrades
Glow in the dark emergency release

BAKflip Backflip F1 Full Bed Open Position BAKflip Backflip F1 Folding Up Cover BAKflip Backflip F1 Closed Folding Tonneau

BakFlip Hard Folding Tonneau Cover Features

BAKflip Backflip F1 Flush Hinge Design BAKflip Backflip F1 Fold Past 90 Degrees BAKflip Backflip F1 Heavy Duty Latches BAKflip Backflip F1 Superior Rail Design

 

Flush Hinge Design
The BakFlip F1 has a unique flush hinge design. It performs better in all weather conditions and is guaranteed to last longer than your truck. The flush hinge minimizes water and ice build up on top of the tonneau cover as well.
Folds beyond 90 degrees
BakFlip F1 is designed to fold past the 90-degree point. This is critical to minimizing wind flow, to allow full visibility of the 3rd break light and to drive safely at high speeds.
Heavy duty latches
BakFlip F1 has heavy duty latches that are encased in an injection molded plastic for enhanced performance and ergonomics.
Superior rail design
BakFlip F1 tonneau cover rails have a 1/8 inch rail support surface that ensures a perfect fit every time. In addition it allows the cover to handle more wight on top of it as well as promoting superior resistance to water.

BAKflip Backflip F1 Warranty
BAK has a 1 year limited warranty on all products and a 2 year limited warranty on BakFlip HD.  BAK’s warranty covers factory caused damage and not damage caused by consumer or by random acts of nature.

 

Bak Flip F1 Tonneau Cover in Action

BAKFlip FiberMax Tonneau Cover

BAKflip Backflip Fiber Closed Bed BAKflip Backflip Fiber Rear Panel and Tailgate Open BAKflip Backflip Fiber Stored Fully Open

BakFlip FiberMax Fiberglass Reinforced Hard Folding Tonneau Cover:
The BackFlip FiberMax was created to give great coverage in all weather conditions whether they be hail, snow, or just every day sunshine.  The underside is made of non-expanding aluminum components that stay solid and strong in all ranges of heat and cold, while the top side composed of an scuff, dent, and ultra violet resistant Fiberglass Reinforced Polymer.

The BakFlip FiberMax is a great compromise of some of the best features of the aluminum BakFlip FiberMax and the flagship model fiberglass BakFlip F1 tonneau cover.

BakFlip Fibermax Tonneau Cover Specs:

Panel exterior:
Aluminum underside Fiberglass Reinforced Polymer (FRP) top
Panel core:
EPS (insulated) 2lb.
Panel frames:
Aircraft grade aluminum / black powder coat
Finish:
Hair cell texture
Thickness:
1/2 inch (OD)
Hinge:
Flush style corrosion proof EPDM rubber
Weight rating:
400 LBS. – evenly distributed
Size of box:
68x23x8 (inches)
Weight of box:
55 LBS
Install tools:
1 x 15mm wrench
Maintenance:
Wash normally with soap and water / 3M formula 303 UV protection.
Warranty:
2 years

 

BAKflip Backflip Fiber Made In the USA
BAKflip Backflip Fiber Rear Cover Open BAKflip Backflip Fiber Tailgate Open BAKflip Backflip Fiber Rear Tonneau Panel Open

BakFlip Hard Folding Tonneau Cover Features

BAKflip Backflip Fiber Rubber Bumper Cab Protection BAKflip Backflip Fiber Rugged Impact Resistant Texture BAKflip Backflip Fiber Scuff Resistant Rubber Seals BAKflip Backflip Fiber Superior Rail Seals

Protects cab and allows 3rd brake visibility
BakFlip Fibermax has rubber bumpers that protect the cab from impact and shifting loads. It is also FMVSS-108 approved to be driven in the open position.
Rugged impact resistant texture
The BakFlip Fibermax has a rugged, impact resistant texture on the top surface. It also remains cooler to the touch than aluminum in extreme heat.
Scuff resistant rubber
BakFlip Fibermax has brand new scuff resistant rubber seals for superior longevity and good looks.
Superior rail seals
The BakFlip Fibermax has new malleable outer rail seals ensuring superior resistance to moisture and dust, while conforming perfectly to rails with design patterns and spray on bedliners.

BAKflip Backflip Fiber Warranty
BAK has a 1 year limited warranty on all products and a 3 year limited warranty on BakFlip FiberMax.  BAK’s warranty covers factory caused damage and not damage caused by consumer or by random acts of nature.

 

Check out the BakFlip FiberMax video!

BAKFlip G2 Hard Folding Tonneau Cover

BAKflip Backflip G2 Stored Fully Open Position BAKflip Backflip G2 Rear Tonneau Open Locked Postion BAKflip Backflip G2 Closed Bed Folding Tonneau Cover

BAKFlip G2 Hard Folding Tonneau Cover

The BakFlip G2 hard tonneau has both a smooth style and impressively engineered features. Its durable and strong aluminum panels provide easy operation, weather protection and a high level of security to your truck bed.  Additionally the BakFlip G2 keeps your stake pockets available and your rear visibility clean of obstruction.

As the #1 selling folding truck bed in the industry, the BakFlip offers the ability to secure and go quickly and just as quickly gain full access to your truck beds hauling features with just the turn of a key.


Technical Specs of BAKFlip G2 Tonneau Cover:

Panel exterior:
Aluminum
Panel core:
EPS (insulated)
Panel frames:
Aircraft grade aluminum / black powder coat
Finish:
Hair cell texture
Thickness:
1/2 inch (OD)
Hinge:
Rounded style corrosion proof EPDM rubber
Weight rating:
400 LBS. – evenly distributed
Size of box:
68x23x8 (inches)
Weight of box:
55 LBS
Install tools:
1 x 15mm wrench
Maintenance:
Wash normally with soap and water / 3M formula 303 UV protection.
Warranty:
1 year

BAKflip Backflip G2 Flush Mount Tonneau Cover BAKflip Backflip G2 Rear Panel Opening BAKflip Backflip G2 Open Bed Position

 

 

 

BAKFlip G2 Hard Folding Tonneau Cover Features

BAKflip Backflip G2 No Drilling Clamps BAKflip Backflip G2 Integrated D-Rings BAKflip Backflip G2 Secure With Tailgate BAKflip Backflip G2 Locks Open

 

 

 

Clamps on with no drilling
The BakFlip G2 requires no drilling. It easily clamps on with a 9/16 wrench.
Integrated D-rings
The BakFlip G2 has integrated D-rings, which allow you to drive with the tonneau cover in incremental positions.
Lock tailgate for ultimate security
All G2 latches are concealed under the tonneau cover. Just lock your tailgate for ultimate security.
Locks in full open position
The BakFlip G2 locks in the full open position. It protects your cab from impact and allows you to drive with the cover open at freeway speeds.

 

(Toyota Tacoma Install)

BAK has a 1 year limited warranty on all products and a 2 year limited warranty on BakFlip HD.  BAK’s warranty covers factory caused damage and not damage caused by consumer or by random acts of nature.

BakFlip HD Tonneau Cover

BAKflip Backflip HD Fully Open Bed Locked Position BAKflip Backflip HD Closed Bed Folding Tonneau Cover BAKflip Backflip HD Bed Open Tailgate Down Position

BAKFlip HD Hard Folding Tonneau Cover:

The BakFlip HD tonneau cover is the upgraded big brother to the G2 tonneau truck bed cover.  I has the same strength and resilience features, just improved on by being made from corrosion resistant powder coated members of aircraft grade aluminum that can take up to 400 pounds on its surface.  This heavy duty cover will probably outlast your truck and is available for most models and is the world’s only QUAD-FOLD™ hard tonneau cover that gives you full truck bed use without having to be taken off the vehicle.

Where does the BakFlip HD win against its competition:

  • When covers are too bulky and heavy, the BakFlip HD is lightweight yet incredibly strong.
  • When covers can be cut with a blade, the BakFlip HD is hard and cannot be cut.
  • When covers have exposed locks and latches, BakFlip HD locks and latches are concealed.
  • When covers take long to install, BakFlip HD installs in minutes without drilling.
  • When covers don’t ship UPS, BakFlip HD ships UPS, even if it’s a long bed super duty.
  • When covers need to be removed to load large items, BakFlip HD simply folds forward.
  • When covers cover stake hole pockets, BakFlip HD offers full access to stake pockets.
  • When covers don’t work with racks and rails, the BakFlip HD does.
  • When covers sit above the rail of the truck, BakFlip HD sits neatly inside the rails.
  • When covers cannot be stood on, BakFlip HD covers can be used as scaffolding.
  • When covers can ding and scratch, BakFlip HD is ding and scratch resistant.
  • When covers can leak, BakFlip HD has a patented drainage system as a double insurance against leakage.
  • When covers are expensive, the BakFlip HD is extremely well priced between traditional hard and soft covers.

The BakFlip HD has all the superior choices in a bed enclosure.

BAKflip Backflip HD Made In the USA

BakFlip HD Tonneau Cover Features

BAKflip Backflip HD Flush Mount Aluminum Panels BAKflip Backflip HD Powder Coated BAKflip Backflip HD Rubber Cab Bumper BAKflip Backflip HD Water Tight Hinge BAKflip Backflip HD Tailgate Lock Security

Flush mount aluminum panels
The BakFlip HD has super heavy duty aluminum panels that are flush mount and extremely low profile.
Powder coated refinement
BakFlip HD has powder coated aluminum panels and frames for an OEM look and feel.
Upgraded components
Refined upgraded components ensure that the BakFlip looks and feels like an OEM product. From protective rubber cab bumpers to ergonomically designed latch housings to Glass filled nylon rod locks, the BakFlip HD is as much elegant
Water tight upgraded hinge design
The BakFlip HD has a sleek contoured water tight fit and improved flush design hinges that perform better in heavy rain conditions.
Ultimate security
Get ultimate security with the BakFlip HD all aluminum tonneau cover. Simply lock your tailgate to secure all your valuables.

BAKflip Backflip HD Warranty
BAK has a 1 year limited warranty on all products and a 2 year limited warranty on BakFlip HD.  BAK’s warranty covers factory caused damage and not damage caused by consumer or by random acts of nature.

 

Check out the BakFlip HD video!

BAKFlip RollBak Heavy Duty Aluminum Retractable Tonneau Cover

BAKFlip Backflip RollBak Tonneau Cover Quarter Open BAKFlip Backflip RollBak Tonneau Cover Rear Open BAKFlip Backflip RollBak Tonneau Cover One Hand Closure

RollBAK Rolling Tonneau Cover

The RollBak Rolling Tonneau Cover is a retractable cover composed of powder-coated heavy-gauged aluminum panels that installs with NO DRILLING clamp mounting system.

Engineered with strong aluminum components the The RollBak Tonneau Cover can withstand 400 lbs and its surface and transforms you cargo area into an armored bed that is only accessible by you.

  • Custom designed and available for most pickup trucks Retracts effortlessly.
  • Intermittent locking positions every 12 inches.
  • Total “weather-tite” security.
  • Felt lined underside.
  • Completely concealed tamper-proof locking.
  • Low profile, flush aerodynamic design.
  • Allows access to stake pockets.
  • E-Z Glide retractable action
  • RollBak retractable bed covers are designed and built to outlast your truck.
  • Each Bak RollBak cover is made from heavy duty materials and components for optimum security, style and function.

Click Here for the instruction manual. (Requires Adobe Acrobat Reader)

Exterior:
Aircraft grade aluminum
Canister:
Impact resistant ABS plastic
Finish:
Black textured powder coat
Locks:
Dual latching
Intermittent stopping:
Yes
Thickness:
½ inch
Operation:
Automatic spring tension
Weight rating:
500 lb. evenly distributed
Average Size canister:
9 inches
Weight of cover:
120 lb.
Maintenance:
Periodic greasing of rails
Warranty:
2 years

BAKFlip Backflip RollBak Tonneau Cover Half Bed BAKFlip Backflip RollBak Tonneau Cover Pull Strap BAKFlip Backflip RollBak Tonneau Cover Tailgate Down

Bak RollBAK Tonneau Cover Features

BAKFlip Backflip RollBak Tonneau Cover Canister Drain BAKFlip Backflip RollBak Tonneau Cover Clamp On BAKFlip Backflip RollBak Tonneau Cover Felt Underside BAKFlip Backflip RollBak Tonneau Cover Stake Pockets BAKFlip Backflip RollBak Tonneau Cover Toolbox

Drain system in canister
The RollBak canister has a drain system that extends from sumps that are cleverly positioned below the bottom surface of the canister for superior water drainage and to prevent ice buildup in the canister.
Clamp on design
RollBak is designed to clamp to your truck for a perfect custom fit.
Felt lined underside
RollBak is felt lined underneath with marine grade, mildew protected felt. The Felt lined underside ensures pin-drop quiet operation. In addition the felt underside protects the top surface when the BakFlip is retracted into the canister.
Full access to stake pockets
RollBak’s superior design ensures full access to stake pockets. This allows you to use your RollBak retractable tonneau cover with rails, tie downs and many racks.
Optional toolbox canister lid
The RollBak has an optional toolbox canister lid that replaces the flush-mount lid. The toolbox lid for the RollBak is super strong, powder coated, lockable and perfect for accessing tools without opening the tonneau cover.

 

 

BAKFlip Backflip RollBak Tonneau Cover Warranty

BAK has a 1 year limited warranty on all products and a 2 year limited warranty on BakFlip HD.  BAK’s warranty covers factory caused damage and not damage caused by consumer or by random acts of nature.

 

Check out the new Bak RollBak video!

 

BAKFlip VP Tonneau Cover

BAKFlip Backflip VP Opening Tailgate BAKFlip Backflip VP Half Bed BAKFlip Backflip VP Rear Open
The BakFlip VP is sleek, lightweight and gives the look of a soft cover smooth enclosure while providing the strength of a hard cover.  Watertight and bed sure, this cover looks great and give superior performance in a low drag and wind efficient smooth surface, free of hardware and break points.

Technical Specs of VP Tonneau Cover:

Panel Exterior
Vinyl
Panel Core
EPS – 2 lb.
Underside
Aluminum
Panel Frames
Frameless
Finish
Textured black
Thickness
1/2 inch
Exterior skin thickness
100 mil
Side seals
EPDM rubber

BakFlip VP Tonneau Cover Features

BAKFlip Backflip VP Stowed Open BAKFlip Backflip VP Full Bed Fold Open BAKFlip Backflip VP Easy Removal BAKFlip Backflip VP Clean Line Tonneau BAKFlip Backflip VP Flush Closed Tonneau

Full cab protection
Special rubber bumpers and panel frames protect the truck in the closed and open position.
Full function
The BakFlip VP easily operates from either side of the truck. It’s lightweight aluminum panels are strong and can be locked in the fully open position.
No drill install
BakFlip VP installs easily with no drilling and can be removed and reinstalled in just seconds.
Scuff and ding resistant
The heavy duty vinyl coated aluminum panels cannot scuff or ding and perform exceedingly well over the long haul.
Seamless no-hinge design
BakFlip VP has no visible hinges for a superior look and performance in all weather conditions.

 

Check out the VP video!

EnCore Folding Tonneau

EnCore Tonno LogoEnCore Folding Truck TonneauThe EnCore Tonno is a low profile, hard paneled tri-fold bed top that provides secure but convenient access from both front and rear.  Self-positioning, this lightweight cover is easy to install and has a self-latching feature for added security. A rear latch locks the cover at the tailgate while a large area forward panel gives access to the front of the bed, also lockable with the vehicles ignition key using extangs BOLT®, one-key lock technology.

The panels are 1-inch thick FRP (fiberglass reinforced plastic) with excellent UV protection and thermal durability. The frame is textured and powder coated and the ExtangTuff rubber corners are designed to resist dents and scratches. EnCore’s has a flexing hinge system that is both ultra-strong and water resistant for a superior performance!

REMOVAL IS SIMPLE

By folding from both the back and the front you can lift the entire mechanism of the truck bed to gain full access.  Reverse these steps and you have a secure bed once again.

ENCORE’S SIDE RAILS AND HINGES

Self-locking pins position the tonneau on rails, to provide a perfect fit for EnCore’s channel sealing system, which integrates the side rails for more water resistant weather protection and the flexible hinge system to be ultra-strong, durable and water resistant, providing superior performance.

INSTALLATION PDF’S

GM0231 EncoreTonno Sept 2013

0231 EncoreTonno Sept 2013

extang Solid Fold Hard Truck Lid Tonneau

extang solid fold folding hard lid tonneau

The Solid Fold hard truck lid tonneau cover can go in or out in seconds, no tools needed, with the fastest installation and removal of any hard tonneau on the market. Yet it is ultra strong and lightweight! Made from aircraft grade aluminum alloy, the Solid Fold has great looking, black textured (poly-tex) paint finish, that provides superior UV lifespan protection.

The easy to use clamp system, made from lightweight but strong glass-filled nylon construction, conveniently nests within rails when not in use and the WeatherTuff Seals hinge design keeps not only water out, but gives easy and convenient functionality, styling and payload safety.

0182 Solid Fold install

extang-Solid-Fold-Folding-Tonneau-Cover

extang Tonneau and Tonno Truck Covers

ExtangLogo

Extang has a history of being first and number one in the truck accessory industry. Since 1982 Extang has been making and selling truck bed tonneau and tonno covers, truck accessories and bed cover products. It was also the first tonneau manufacturing company in America to sell the tonneau and tonno truck bed covers and truck accessories nationwide. Extang was also the first to offer the “No Damage, No Drilling, Clamp-On Aluminum Frame” truck cover and tonno truck bed cover systems.

Extang offers tonneau truck cover customers a Lifetime warranty on the tonneau truck cover, tonno pickup truck frame and a 10 Years limited warranty on any of our tonneau or tonno pick up truck bed covers and tonneau truck bed cover tarps.

Roll-X Hard Rolling Tonneau Cover

BAKflip Backflip Roll X Closed Bed BAKflip Backflip Roll X Tailgate Down BAKflip Backflip Roll X Rolled UpBakflip Backflip Roll X Bed Opening

Roll-X Hard Rolling Tonneau Cover:

The Roll-X tonneau provides a combination of hard cover solidity and soft cover flexibility. The Roll-X design provides rock solid performance in a hard tonneau cover with full access to the trucks cargo area, giving the perfect amalgamation of both types. If you are in the market to purchase a solid, robust, all weather bed cover that performs and delivers sleek styling; the Roll-X hard rolling truck bed cover is you’re best choice.  The Roll-X was designed to withstand over 400 lbs of evenly distributed weight, while Bak Roll-X “no profile” design delivers a low coefficient of drag for improved gas efficiency.


Technical Specs of Roll-X Tonneau Cover:

Exterior:
Aluminum covered with Vinyl
Underside:
Aircraft grade aluminum
UV protected:
Yes
Finish:
Hair cell texture
Thickness:
1/4 inch (OD)
Slat size:
1.75 inches
Weight rating:
400 LBS. – evenly distributed
Lockable:
Yes – lock tailgate
Weight:
55 LBS
Install tools:
1 x 14mm wrench
Maintenance:
Wash normally with soap and water / 3M formula 303 UV protection.
Warranty:
1 year

BAKflip Backflip Roll X Rolling Bed Cover BAKflip Backflip Roll X Roll Up BAKflip Backflip Roll X Open Bed

Roll-X Tonneau Covers Features

BAKflip Backflip Roll X Solid Construction

BAKflip Backflip Roll X Security

BAKflip Backflip Roll X Flush Profile

BAKflip Backflip Roll X Easy Install

 


Roll-X Strength!
Roll-X tonneau covers are stronger than any other rolling tonneau. They are built to outlast your truck and perform flawlessly.
Easy LockDown!
The Roll-X is the most secure rolling tonneau cover on the market. The genius locking rail design ensures that the entire cover is locked down from the cab all the way to the tailgate on both sides, merely by closing the cover.
“no profile” flash design!
Roll-X is so low profile that from the side of the truck you cannot even tell that it’s there. Best of all, its slim line rail system also allows for full use of accessories like bed extenders, bed rails, tie downs and racks!
Easy Roll-X installation!
Roll-X installs in a matter of minutes with no drilling at all. All you need to install a Roll-X tonneau cover is about 15 minutes and a 15mm wrench.

 

UnderCover FLEX Folding Hard Tonneau Cover

UnderCover FLEX Folding Hard Tonneau Cover

What are the key features of the UnderCover Flex Folding Hard Tonneau Cover?

  • Full Bed Access
  • Low Profile
  • Easy Removal
  • Secure Design
  • No Drill Install
  • Weather Resistant

Low Profile

Ultra-low profile design rests inside the bed rails allowing for a very sleek look.

Full Access

Built in prop rods secure the cover allowing your truck to be driven with the cover fully open.

Prop Rods

Prop rods conveniently stow in rubber coated clips.

Easy Removal

Entire cover can be removied in seconds with no tools needed.

Secure Design

Plastic buckles and straps are included to secure the panels in the partially open position.

FRP Composite Panels

Lighter, stronger, and higher dent resistance than aluminum.

Weather Resistant

Rubber seals and drain tubes channel water away from and out of the bed.

No Drill Install

Ultra-low profile design rests inside the bed rails allowing for a very sleek look.

Application Guide
Below is the UnderCover Flex application guide for all UnderCover Flex models. Scroll or click to find your model today.

Model Application Year
GM Models
**Aftermarket bed rail caps may need to be removed for proper installation.
Caution: Must choose With or W/O Cargo Mgmt and With or W/O Bed Caps for 2007-2013 GM applications.
FX11000 Chevy Colorado/GMC Canyon, Crew Cab, 5 Short Bed 2004-2013
FX11001 Chevy Colorado/GMC Canyon, Std/Ext Cab, 6 Short Bed 2004-2013
FX11004 Chevy Silverado/GMC Sierra 1500 Crew Cab 5.7 Short Bed With Factory Installed GM Cargo Mgmt System W/O Factory Bed Rail Caps 2007-2013
FX11005 Chevy Silverado/GMC Sierra 1500 Crew Cab 5.7 Short Bed W/O Factory Installed GM Cargo Mgmt System W/O Factory Bed Rail Caps 2007-2013
FX11006 Chevy Silverado/GMC Sierra 1500 Crew Cab 5.7 Short Bed W/O Factory Installed GM Cargo Mgmt System With Factory Bed Rail Caps 2007-2013
FX11007 Chevy Silverado/GMC Sierra 1500/2500 Std/Ext/Crew Cab 6.5 Short Bed (Also fits 2014 Silverado/Sierra 2500hd) With Factory Installed GM Cargo Mgmt System W/O Factory Bed Rail Caps 2007-2013
FX11008 Chevy Silverado/GMC Sierra 1500/2500 Std/Ext/Crew Cab 6.5 Short Bed (Also fits 2014 Silverado/Sierra 2500hd) W/O Factory Installed GM Cargo Mgmt System W/O Factory Bed Rail Caps 2007-2013
FX11009 Chevy Silverado/GMC Sierra 1500/2500 Std/Ext/Crew Cab 6.5 Short Bed (Also fits 2014 Silverado/Sierra 2500hd) W/O Factory Installed GM Cargo Mgmt System With Factory Bed Rail Caps 2007-2013
FX11012 Chevy Silverado/GMC Sierra 1500 Crew Cab 5.7 Short Bed 2004-2006
FX11013 Chevy Silverado/GMC Sierra 1500/2500 Std/Ext/Crew 6.5 Short Bed 1999-2006
FX11016 Chevy Silverado/GMC Sierra 1500 Crew Cab 5.7 Short Bed With Factory Installed GM Cargo Mgmt System With Factory Bed Rail Caps 2007-2013
FX11017 Chevy Silverado/GMC Sierra 1500/2500 Std/Ext/Crew Cab 6.5 Short Bed (Also fits 2014 Silverado/Sierra 2500hd) With Factory Installed GM Cargo Mgmt System With Factory Bed Rail Caps 2007-2013
FX11018 Chevy Silverado/GMC Sierra, Crew/Ext Cab 5.7 Short Bed 2014
FX61002 Colorado, Double Cab 5 Bed (Thailand) 2012-2013
FX61003 Colorado, Reg/Ext Cab 6 Bed (Thailand) 2012-2013
FX11019 Chevy Silverado/GMC Sierra, Std/Ext/Crew Cab, 6.5 Short Bed (Will not fit the 2014 Silverado/Sierra 2500hd) Also fits the 2015 Silverado/Sierra 2500hd 2014-2015
Model Application Year
Ford Models
**Aftermarket bed rail caps may need to be removed for proper installation.
FX21000 F150 Std/Ext Cab 6.5 Short Bed 1997-2003
FX21002 F150 Super Crew 5.5 Short Bed (Also fits Lincoln Mark LT, must remove bedrails from Lincoln) 2004-2014
FX21004 F150 Std//Ext/Crew Cab 6.5 Short Bed (Also fits Lincoln Mark LT, must remove bedrails from Lincoln) 2004-2014
FX21007 Ranger Reg/Ext Cab 6 Short Bed 1994-2011
FX21010 F250/F350 Super Duty Ext/Crew Cab 6.8 Short Bed 2008-2014
FX21012 F250/F350 Super Duty Ext/Crew Cab 6.8 Short Bed 1999-2007
FX21014 Ranger Double Cab 5 Short Bed (Thailand) 2007-2011
FX21015 Ranger T6 Double Cab 5 Short Bed (Thailand) 2012-2013
FX21016 Ranger Double Cab 5 Short Bed (Australia / NZ) 2007-2011
FX21017 Ranger T6 Reg/Ext cab 6 Short Bed (Thailand) 2012-2013
Model Application Year
Dodge Models
**Aftermarket bed rail caps may need to be removed for proper installation.
FX31000 Dakota Quad Cab 5.5 Short Bed 1999-2011
FX31001 Dakota Std/Ext Cab 6.5 Short Bed 1997-2011
FX31002 Ram Std/Ext Cab 6.5 Short Bed 1994-2001
FX31004 Ram Quad/Mega Cab 6.5 Short Bed (Does not fit Ram Box) 2002-2014
FX31006 Ram 1500 Crew Cab 5.5 Short Bed (Does not fit Ram Box) 2009-2014
Model Application Year
Toyota Models
FX41002 Tacoma Double Cab 5 Short Bed 2005-2014
FX41003 Tacoma Std/Ext/Crew Cab 6 Short Bed 2005-2014
FX41007 Tundra Crew Max 5.5 Short Bed W/O Cargo Management System 2007-2014
FX41008 Tundra Crew Max 5.5 Short Bed With Cargo Management System 2007-2014
FX41009 Tundra Double Cab 6.5 Short Bed W/O Cargo Management System 2007-2014
FX41010 Tundra Double Cab 6.5 Short Bed With Cargo Management System 2007-2014
FX41013 Hilux, Crew Cab, 5 Short Bed (Thailand) 2005-2013
Model Application Year
Mazda Models
**Aftermarket bed rail caps may need to be removed for proper installation.
FX21007 B Series 6 Short Bed 1994-1997
FX21014 BT50 Double Cab 5 Short Bed (Thailand) 2006-2010
FX21015 BT50 Double Cab 5 Short Bed (Thailand) 2011-2013
Model Application Year
Mitsubishi Models
**Aftermarket bed rail caps may need to be removed for proper installation.
FX31000 Raider Quad Cab 5.5 Short Bed 2006-2013
FX31001 Raider Ext Cab 6.5 Short Bed 2006-2013
FX91001 L200 Crew Cab 5 Short Bed (Thailand) 2006-2013
Model Application Year
Nissan Models
**Aftermarket bed rail caps may need to be removed for proper installation.
Caution: Must choose With or W/O Utili-Track for Nissan applications.
FX51003 Frontier/ Navara Crew Cab 5 Short Bed W/O Utili-Track System 2005-2014
FX51004 Frontier/ Navara Ext/Crew Cab 6 Short Bed W/O Utili-Track System 2005-2014
FX51005 Titan Crew Cab 5.5 Short Bed W/O Utili-Track System 2004-2014
FX51006 Titan King Cab 6.5 Short Bed W/O Utili-Track System 2004-2014
FX51009 Titan Crew Cab 5.5 Short Bed With Utili-Track System 2004-2014
FX51010 Titan King Cab 6.5 Short Bed With Utili-Track System 2004-2014
FX51011 Frontier/ Navara Crew Cab 5 Short Bed With Utili-Track System 2005-2014
FX51012 Frontier/ Navara Ext/Crew Cab 6 Short Bed With Utili-Track System 2005-2014
Model Application Year
Suzuki Models
**Aftermarket bed rail caps may need to be removed for proper installation.
Caution: Must choose With or W/O Utili-Track for Suzuki applications.
FX51003 Equator Crew Cab 5 Short Bed W/O Utili-Track System 2009-2013
FX51004 Equator Ext Cab 6 Short Bed W/O Utili-Track System 2009-2013
FX51011 Equator Crew Cab 5 Short Bed With Utili-Track System 2009-2013
FX51012 Equator Ext Cab 6 Short Bed With Utili-Track System 2009-2013
Model Application Year
Isuzu Models
**Aftermarket bed rail caps may need to be removed for proper installation.
FX61001 Dmax, Double Cab 5 Bed (Thailand) 2004-2011
FX61002 Dmax, Double Cab 5 Bed (Thailand) 2012
FX61003 Dmax, Reg/Ext Cab 6 Bed (Thailand) 2012-2013
Model Application Year
Volkswagen Models
**Aftermarket bed rail caps may need to be removed for proper installation.
FX71000 Amarok Crew Cab 5 Short Bed (Argentina) 2010-2013
  • UnderCover Flex FAQ 1strong>What is the warranty for my Flex Cover?
    Your Flex Cover has a three year warranty.
  • What tools will I need to install the Flex Cover?
    A 9/16 wrench is the only tool required to install the Flex Cover. Flex Covers require no drilling to attach the cover to the bed.UnderCover Flex FAQ 3Some applications may require drilling for the drain tubes.
  • Is the cover waterproof? Will I have leaks?
    The main feature of the Flex Cover is its quick access to the truck bed. The Flex Cover is water resistant but not waterproof.UnderCover Flex FAQ 4There are built-in drains to channel 99% of the water away from the bed. For a watertight bed cover we offer the UnderCover hard tonneau that may be a better alternative.
  • Will the Flex Cover work with my drop-in bed liner?
    Yes, your Flex Cover works perfectly with most under the rail drop-in bed liners (some minor trimming may be required).UnderCover Flex FAQ 5
  • I have a spray-in liner and a bed extender, will the Flex Cover work for me?
    Yes, the Flex Cover works with bed extenders and factory cargo management systems. Any additional hardware needed for the Flex Cover to mount with factory cargo management systems is included for the particular application.UnderCover Flex FAQ 6
  • What is the cover made of?
    The panels consist of a top layer of FRP (fiberglass reinforced polymer). The core material is 3lb density expanded polystyrene, and the bottom layer is FRP. The seals are EPDM.
  • How much weight can I carry on top of the Flex Cover?
    The UnderCover Flex can support 400 LBS evenly distributed.UnderCover Flex FAQ 7
  • Can I drive with the Flex Cover open?
    With the Flex Cover folded forward and secured with the included straps and buckles, or folded into the upright position with both lock rods engaged, it is safe to operate your truck at normal speeds.UnderCover Flex FAQ 8
  • Where is the Flex Cover made?
    Flex Covers are built right here in the USA!
  • What do you recommend to use to keep my Flex Cover looking new?
    UnderCover Flex FAQ 10 The FRP panels are imbedded with a UV inhibitor. Normal car wash materials will work perfectly. We offer a finishing product called Tonneau Sauce to really bring out the shine on your Flex Cover.
  • Can I open and close my tail gate with the Flex Cover closed?
    Yes, your tail gate can be opened with the Flex Cover closed. However, the rear panel of the Flex Cover must be opened before closing the tail gate to avoid damaging the rear seal.UnderCover Flex FAQ 11
Address:
5511 W. Central Ave.
Wichita, KS 67212

PHONE:(316)942-2864


HOURS:

Monday-Friday 8am-5pm
Saturday 9am-2pm
Closed Sunday