Soft Truck Tonneaus

Soft Truck Tonneaus provide a cover for your valuables without being too heavy and hard to maneuver.

Nissan Soft Top Tonneau

Tacoma Soft Lid

Hummer H3 Soft Top Tonneau

Snap On Soft Top Bed Cover

Toyota Flip Soft Top

BAKFlip RollBak Heavy Duty Aluminum Retractable Tonneau Cover

BAKFlip Backflip RollBak Tonneau Cover Quarter Open BAKFlip Backflip RollBak Tonneau Cover Rear Open BAKFlip Backflip RollBak Tonneau Cover One Hand Closure

RollBAK Rolling Tonneau Cover

The RollBak Rolling Tonneau Cover is a retractable cover composed of powder-coated heavy-gauged aluminum panels that installs with NO DRILLING clamp mounting system.

Engineered with strong aluminum components the The RollBak Tonneau Cover can withstand 400 lbs and its surface and transforms you cargo area into an armored bed that is only accessible by you.

  • Custom designed and available for most pickup trucks Retracts effortlessly.
  • Intermittent locking positions every 12 inches.
  • Total “weather-tite” security.
  • Felt lined underside.
  • Completely concealed tamper-proof locking.
  • Low profile, flush aerodynamic design.
  • Allows access to stake pockets.
  • E-Z Glide retractable action
  • RollBak retractable bed covers are designed and built to outlast your truck.
  • Each Bak RollBak cover is made from heavy duty materials and components for optimum security, style and function.

Click Here for the instruction manual. (Requires Adobe Acrobat Reader)

Exterior:
Aircraft grade aluminum
Canister:
Impact resistant ABS plastic
Finish:
Black textured powder coat
Locks:
Dual latching
Intermittent stopping:
Yes
Thickness:
½ inch
Operation:
Automatic spring tension
Weight rating:
500 lb. evenly distributed
Average Size canister:
9 inches
Weight of cover:
120 lb.
Maintenance:
Periodic greasing of rails
Warranty:
2 years

BAKFlip Backflip RollBak Tonneau Cover Half Bed BAKFlip Backflip RollBak Tonneau Cover Pull Strap BAKFlip Backflip RollBak Tonneau Cover Tailgate Down

Bak RollBAK Tonneau Cover Features

BAKFlip Backflip RollBak Tonneau Cover Canister Drain BAKFlip Backflip RollBak Tonneau Cover Clamp On BAKFlip Backflip RollBak Tonneau Cover Felt Underside BAKFlip Backflip RollBak Tonneau Cover Stake Pockets BAKFlip Backflip RollBak Tonneau Cover Toolbox

Drain system in canister
The RollBak canister has a drain system that extends from sumps that are cleverly positioned below the bottom surface of the canister for superior water drainage and to prevent ice buildup in the canister.
Clamp on design
RollBak is designed to clamp to your truck for a perfect custom fit.
Felt lined underside
RollBak is felt lined underneath with marine grade, mildew protected felt. The Felt lined underside ensures pin-drop quiet operation. In addition the felt underside protects the top surface when the BakFlip is retracted into the canister.
Full access to stake pockets
RollBak’s superior design ensures full access to stake pockets. This allows you to use your RollBak retractable tonneau cover with rails, tie downs and many racks.
Optional toolbox canister lid
The RollBak has an optional toolbox canister lid that replaces the flush-mount lid. The toolbox lid for the RollBak is super strong, powder coated, lockable and perfect for accessing tools without opening the tonneau cover.

 

 

BAKFlip Backflip RollBak Tonneau Cover Warranty

BAK has a 1 year limited warranty on all products and a 2 year limited warranty on BakFlip HD.  BAK’s warranty covers factory caused damage and not damage caused by consumer or by random acts of nature.

 

Check out the new Bak RollBak video!

 

Bedlocker Retracable Tonneau

Bedlocker Retracable Tonneau

Bedlocker Retracable Tonneau

Electric Retractable Tonneau Cover

  • Hard tonneau cover retracts into canister at the front of the truck bed
  • Durable black powder-coat finish on rigid aluminum panels
  • Patented silicon weather hinge provides a tight seal between the aluminum panels
  • Manual Switch Kit (available as an option) can be mounted in the cab or back by the tailgate in case of lost or broken remotes.
  • Electromagnetic brake locks cover in any position
  • Electric motor operated by remote control
  • Drive System release lever provides cover operation in case of lost power
  • No-drill, clamp-in design (on most applications) for installation in about an hour
  • Low-profile, aerodynamic design saves gas
  • Fits over 5th wheel trailer hitches

E-Series™ Retractable Tonneau Cover

E-Series™ Retractable Tonneau Cover

roll-n-lock e-series™ retractable tonneau

Roll N Lock E-Series™ Retractable Tonneau Cover Features

  • Roll-N-Lock E-Series™ features remote-control opening and closing as well as an automatic light and emergency release handle
  • Push-button remote opens or closes the cover in just 9 seconds
  • Clamp-on installation
  • Compact housing and flush handle
  • Torsion spring equipped
  • Drainage
  • Multiple locking positions
  • Built in tailgate lock
  • Finger insulator grip
  • Key slot cover
  • 1 Year Limited Warranty

Roll N Lock E-Series™ Retractable Tonneau Cover Description

The Roll-N-Lock E-Series™ Retractable Tonneau cover has all of the same great features as the M-Series™, but features an electronic remote that allows you to open and close the cover in just 9 seconds with a push-button remote! The E-Series is one of the most advanced electronic retractable truck bed covers on the market. It has incredible cargo security, and features an emergency release mechanism for manual operations and an automatic light for those times when a little extra light is needed. The cover itself is extremely rigid and has a vinyl-over-aluminum laminated construction. This cover has a unique design, with slatted aluminum substrate which supports the vinyl. Each slat is rotatively joint by a interlocking hinge. This makes for a great strength and extremely smooth, quiet operation of the cover, all while staying very compact. If you take a close look at the Close Roll-N-Lock hinge in the flat position, it reveals the fact that each slat is inseparably locked together, yet when rotated, no metal-to-metal contact occurs.

JackRabbit Spring-Action Retractable Tonneau

JackRabbit Spring-Action Retractable Tonneau

JackRabbit Spring-Action Retractable Tonneau

  • Spring-Action Retractable Tonneau Cover
  • Hard tonneau cover retracts out of the way into canister at the front of the truck bed
  • Weather-resistant padded
  • Polymer laminated to rigid aluminum panels that glide along black powder-coated side rails
  • Heavy-duty spring helps the tonneau cover retract smoothly and easily
  • Built-in pull strap engages the latch at 12″ intervals on short and long-bed models
  • Advanced low profile Independent latch and lock handle system off set to driver side
  • No-drill, clamp-in design (in most applications) for quick and drill-free installation
  • Full length handle and over the tailgate seal enhance the cover design
  • Fits over 5th wheel trailer hitches

M-Series™ Retractable Tonneau Cover

M-Series™ Retractable Tonneau Cover

M-Series Pick Up Truck Tonneau Cover

M-SERIESTonneau Cover

From its retractable function, which permits opening or closing in literally seconds, to its rigid, vinyl-over-aluminum laminated construction, this hybrid cover offers everything other covers do not. There are no snaps to manipulate, there is no roll or bundle to lash down or stow, no crossbars to negotiate, no fabric shrinkage to struggle with, no folding or solid hinged covers to combat, and, best of all, no worries about the security of cargo. The Roll-N-Lock retractable truck bed cover…by far the most intelligent and versatile tonneau cover made.

The Roll-N-Lock Difference

What sets Roll-N-Lock’s tonneau cover construction apart from the competition is not just the superior quality of our vinyl surface material, but also the design of the slatted aluminum substrate which supports the vinyl. Each Roll-N-Lock slat is rotatively joined by an interlocking hinge. It is the geometry of this uniquely-contoured hinge that lends Roll-N-Lock tonneau covers their strength, quiet, smooth, non-binding movement and roll compactness. Close examination of the Roll-N-Lock hinge in the flat position reveals the fact that each slat is inseparably locked together, yet when rotated, no metal-to-metal contact occurs.

M-Series Tonneau Cover Features

  • Torsion Spring Equipped On the M-Series tonneau cover, Roll-N-Lock employs a heavy-duty torsion spring drive, which is housed in a 3″ aluminum reel to ensure years of reliable use.
  • Compact Housing And Flush Handle With the M-Series tonneau cover fully retracted, the handle mechanism rolls back flush with the face of Roll-N-Lock’s compact housing, allowing more room for unobstructed storage.
  • Low Profile Aerodynamic Lid The M-Series’ sleek appearance is enhanced by a low profile, aerodynamically styled housing lid. The lid is secured to the unit by two screws and two concealed pins.
  • Drainage Recessed drain fittings ensure rapid and complete drainage of the unit housing.
  • Clamp-On Installation Roll-N-Lock’s patented clamp-on track design greatly simplifies the installation process while minimizing the need for drilling holes on most trucks.
  • Multiple Latching Positions With just a turn of the lock-lever, the Roll-N-Lock tonneau cover slides open. As the cover is pulled back using the convenient built-in pull strap, the patented ratchet-style locking mechanism latches in place at ¼, ½, ¾ or fully closed positions.
  • Built-In Tailgate Lock Keep cargo in your truck bed safe with Roll-N-Lock’s patented, built-in tailgate locking system, AutoLock. Our four-point locking system secures the tailgate and bed cover simultaneously for the most secure system possible in a retractable tonneau cover application.
  • Finger Insulator Grip For hot, sunny climates, we have developed a finger insulator grip, which allows the handle to be grasped without fingertips being burned.
  • Key Slot Cover For colder regions, we have developed a key slot cover to prevent water from entering the lock mechanism and freezing.
  • Unique Construction Our contoured, patented hinge design provides smooth, frictionless rotation. In the rotated position, the locking flange functions as a positive stop, minimizing stress on the surface material. In the flat position, the locking flange traps the radius of the adjacent slat, preventing disengagement when a surface load is applied.
  • Shipping Roll-N-Lock tonneau covers can be shipped by FedEx® and UPS®.

Switchblade Retractable Tonneau

Switchblade Retractable Tonneau

Switchblade Retractable Tonneau

SWITCHBLADE – INSTALLS IN MINUTES. RETRACTS IN SECONDS. REMOVABLE ANYTIME.

  • Continuous Tension Spring™ helps cover retract smoothly and easily in just seconds.
  • Removable canister for total truck bed access and maximize cargo capacity.
  • Cover features Pace’s ArmorTek™ construction – a weather-resistant, padded polymer bonded to rigid aluminum panels. Provides hard cover security with a “soft top” look.
  • Full width handle makes opening or closing the cover from either side a breeze.
  • Convenient Pull Strap. No need to climb into truck bed to operate.
  • No-drill, clamp-in design for quick and drill-free installation
  • Easy to install and remove – anytime, anywhere. Only tools needed are a Phillips Screwdriver and 7/16” Wrench.
  • Allows full rear visibility. (Unlike folding solutions that block rear window.)
  • Designed specifically for Crew Cab Extra Short Bed Trucks.
  • 1-Year Limited Warranty
Address:
5511 W. Central Ave.
Wichita, KS 67212

PHONE:(316)942-2864


HOURS:

Monday-Friday 8am-5pm
Saturday 9am-2pm
Closed Sunday